Electric Winches

Brake Winch for Hazers

You need a brake winch for your Hazer! Lowering your Hazer with a brake winch prevents slippage of the winch handle, and allows for greater control. Brake winches have an internal friction brake which automatically applies a constant, positive holding action. The Hazer remains exactly in position when the handle is released. You have perfect control and peace of mind.

Hazer Brake Winches
Item No.	Description	Price	Qty
BW-8001	Brake Winch for H-2, 3 & 4 w/hardware	$80.95
BW-8002	Brake Winch for H-5 w/hardware	$79.95
Receive a $37.50 when you upgrade to a brake winch with any original Hazer order.

Brake Winches

Choose from our wide selection of winches which are sure to fit just about any need.

Laminated high carbon steel gears are heat-treated for longer life.
Embossed, reinforced bases for extra strength.
Meets ASAE Safety Standard S361.3.
Handle is integral part of braking mechanism.

Brake Winches
Item No.	Capacity lbs.	Drum Diameter	Gear Ratio	Mech. Adv.	Handle Length	Drum Cap	Price	Qty
B-800	800	1.875"	4.4:1	29.9	7"	3/16" x 68’	$72.95
B-2000	1200	2.5"	5.4:1	27.8	7"	7/32" X 69’	$126.95

(1) Capacity based on direct line pull on third layer of line on drum. (2) Drum capacity shown is based on cable size listed. (Cable not included.) (3) Brake winches have a friction brake which automatically applies a constant, positive holding action. The load remains exactly in position when the handle is released. Requires a minimum load. (4) Winches are not to be used as hoists for lifting, supporting or transporting people.

Standard Pull Winches

Laminated, high carbon steel gears for longer life.
Gears are arc-welded and drive shaft gears are copper brazed for durability.
Rigid, welded reel construction for added strength.
Freewheel when the ratchet is disengaged.
Load matched gear ratios for easier cranking.
Zinc plated TUFFPLATEª finish.
Base plates fit BIA standard mounting hole pattern for easy installation.
Meets SAE Standard J1853.

Standard Pull Winches
Item No.	Capacity lbs.	Drum Diameter	Gear Ratio	Mech. Adv.	Handle Length	Drum Cap	Price	Qty
W-1100	1100	.875	3.7:1	49	7 "	3/16" X 81’	$42.95

(1) Capacity based on direct line pull on the third layer of the drum. Capacity is reduced as the line builds up on the drum. (2) Drum capacity based on cable size listed. (Cable not included.) (3) Winch is not to be used as hoists for lifting, supporting or transporting *people*.

Electric Winches

StrongArm® electric winches provide load-moving muscle
with just the push of a button or switch.

Electric winch gear-train uses heat-treated sintered-iron gears for smooth, quiet operation.

Final drive gears are heat-treated high carbon steel for greater strength.

Precision needle bearings are used in high-load areas for low friction and longer life.

Die formed base is adapted for quick mounting applications.

Emergency crank handle is standard equipment.

Attractive brushed stainless steel front plate for superior rust resistance.

1-piece high impact case provides excellent weather resistance and protection for internal components.

Hook safety snap keeps load securely attached.

Features Power-in, Power-out, controlled Freewheeling clutch and automatic brake.
Available in 120 volt AC and 12 volt DC models.

Remote control kits are available.

Electric Winches

Item No. Volts / Amps Load Capacity Gear Ratio SA=Cable
Price

Qty

WD-1200 12 Volt DC / 70 4500 lbs. 584:1 7/32" x 50' $412.95

WA-1200 120 Volt AC / 6 4000 lbs. 584:1 7/32" x 50' $489.95

DC Models
High-torque 12 volt DC motor has circuit-breaker overload protection.
StrongArm DC electric winches have a dynamic motor brake as well as a mechanical friction brake to securely hold the load.
DC models include wiring harness, 25 foot positive battery wire, and 8 foot ground wire.

AC Models
120 volt AC operation complete with 10 foot, 3 wire grounded power cord and built-in 3 position rocker switch.

Electric Winch Accessories
Item No.	Description	Price	Qty
W-6371	Remote Hand-Held Switch, for 12 volt DC StrongArm® winch models. Permits user to operate winch from location up to 10' away. (Shown at upper left)	$158.95
W-6372	Remote Hand -Held Switch for 120 volt AC electric winches. 25' power cable, 8' ground cable, #8 wire with switch and 80 amp circuit breaker. (Shown at lower left)	$49.95

	Hazers & Accessories- HOME
	CLICK HERE! Online Information Request Form!
	Glen Martin Engineering, Inc. HOME