Imagine never climbing a tower again! 
With the Hazer Tram System, you can!

Eliminates Tower Climbing!
Allows Easy Access to Antennas 
Carries Heavy Loads
Quality Construction
Easy Installation on Erected Tower

How does it work?
The Hazer works like a simple elevator designed to provide horizontal mobility of your antennas, measuring instruments, rotators, etc. The Hazer is designed to wrap around the tower. A pulley at the top of the tower, along with a winch and wire rope is used to raise and lower the antenna. It’s as simple as raising a flag up a flag pole. Never climb your tower again! The Hazer makes servicing your antennas a cinch, even with one person! Best of all, you may access your antennas at any time you want. Just lower them to the ground, simply and easily. The Hazer guarantees complete ease of mind and satisfaction.

May Guy Wires be used with the Hazer?
A fifty foot tower will require only one set of guy wires in most cases. We suggest putting these guys at the very top of the tower in the few inches just above the Hazer. To lower a beam antenna, disconnect two guys by completely unscrewing the turnbuckles at the ground. The guys then will drape in toward the tower. The Hazer can then be lowered to the ground. Once down, the guys can be reconnected. Imagine... having a completely guyed tower with your antenna system parked at ground level. Never worry about storms again!

Is it easy to install?
The Hazer is easily assembled on an erected tower; however, some climbing is necessary to install the pulley block assembly and winch cable. If it is installed before the tower is erected, no climbing is required. Once installed, the Hazer travels smoothly past tower braces and section joints.