|
Each roof-top tower comes with two universal
mounting plates. The distance between these plates very, depending on
the tower model (refer to chart below for dimensions).
Rotating Setups
Usually, a rotator will be mounted on the universal mounting plate
located inside the tower. A mast then extends up through the next plate,
which will accommodate a thrust bearing (TB-25).
Non-Rotating Setups
To secure a mast in a fixed position, use two mast clamps (MC-10), one
on each plate.
|
Model |
Height |
Distance
Between Plates |
Base Width |
RT-424
|
4.5' |
34.75" |
24” |
RT-832
|
8.0' |
43.75" |
32” |
RT-936
|
9.0' |
43.75" |
36” |
RT-1832
|
17.5' |
37.62" |
32” |
|
RT-2632 |
26' |
37.62" |
42" |
|
