MF-1333 Heavy Duty Foldover

DESCRIPTION
EXTRA Heavy Duty Fold-Over Tower. The first ten feet of the tower is constructed of galvanized steel.

DESIGN SPECIFICATIONS
Tower Height	30 feet
Mast Length over tower	3 feet
Fold-Over hinge height	10 feet
Tower side width	12 3/4"
Length of each section	10 feet
Maximum allowable vertical load on 1 siderail leg	8750 lb.
Max. allowable equipment deadweight at 33 ft. level	50 lbs
Hardware	18-8 SS
Weight per aluminum section	29 lbs.
Steel base section weight	200 lbs
Total shipping weight	500 lbs.
Meets BOCA-UBC-EIA-AASHTO Building Codes

FOOTING SPECIFICATIONS
Concrete Base width	33"
Concrete base depth or below frost line	54"
Cubic yards concrete	1.05

ORDERING INFORMATION		TABLE OF BOCA CODE REQUIREMENTS
Model No.	Description	Wind	70	80	90	100	110
MF-1333	30� Fold Over with level base	Design	MPH	MPH	MPH	MPH	MPH
Kit Includes: Footing Section, 30' Tower (First 10 ft. section made of galvanized steel, second and third section made of anodized aluminum truss), Fold-Over Assembly, 5' aluminum Mast, Lightning Rod & 8’ Ground Rod Kit, Secured winch for added safety and reliability.		10'	82	62	64	53	30
		15'	60	50	40	35	25
		20'	40	48	35	29	21
		25'	30	28	15	10	5
		30'	22	15	9	4	1
Quantity discounts available. Contact us.		Maximum allowable sq. feet area of attached equipment.

Fold-Over Tower Links
	MF-1330, 31 & 32 Fold-Over- Standard Duty Folding Unit
	Anti-Climb Accessories
	Base Assembly for MF-1333 Fold-Over Towers
	Side Arms for MF-1300 Series Towers
	Read what others say about Martin Fold-Over Towers
	Commercial Towers Home Page